This content from the SAP Concur Community was machine translated for your convenience. SAP does not provide any guarantee regarding the correctness or completeness of this machine translated text. View original text custom.banner_survey_translated_text
Hi All,
Kindly provide the details configuration guide to meet this statutory requirement.
Thanks,
Shyam
This content from the SAP Concur Community was machine translated for your convenience. SAP does not provide any guarantee regarding the correctness or completeness of this machine translated text. View original text custom.banner_survey_translated_text
Hi @shyam741
Topic: Austria Statutory Mileage configuration
Please see the below. Hope this helps.
——-
The question is similar to @Rahul4 regarding "Austria personal car mileage".
Please check my response to his query.
SAP Concur – Austria Statutory Mileage Configuration
Concur mileage rate configuration does not automatically guarantee correct payroll tax treatment.
Validate annual accumulation in Legacy Car Configuration and use Payroll integration for taxable excess mileage.
Thanks & Regards
—
Samantha Prathikantam
SF_EC & ECP / SAP Concur Consultant
This content from the SAP Concur Community was machine translated for your convenience. SAP does not provide any guarantee regarding the correctness or completeness of this machine translated text. View original text custom.banner_survey_translated_text
Hi Samantha,
Thank you for your response.
I have couple of queries regarding the proposed config.
1. How can we differentiate between claims that falls within annual 30K KM limit and those the exceed the limit.
2. We need an appropriate flag or indicator on expense reports that exceeds annual 30K threshold so that they can be identified and treated accordingly for tax purposes.
Could pls clarify how this requirement can be addressed through std SAP Concur config.
Thanks,
Shyam
This content from the SAP Concur Community was machine translated for your convenience. SAP does not provide any guarantee regarding the correctness or completeness of this machine translated text. View original text custom.banner_survey_translated_text
Hi @shyam741 ,
Please find my responses to your queries below:
1. How can we differentiate between claims that falls within annual 30K KM limit and those the exceed the limit.
You can configure an annual threshold limit based on kilometers traveled and define different rates for various distance ranges.
Note - If you want to set an annual threshold of 30,000 KM (Distance Limit 1), leave Distance Limit 2 and Distance Limit 3 blank. Configure the applicable rate only for the 1–30,000 KM range and set the rate to 0 for any distance exceeding 30,000 KM.
This ensures that once an employee exceeds the annual limit of 30,000 KM, any additional kilometers will automatically be calculated at a zero rate.
Please refer step by step setup guide.
Variable Rate Configuration (Company or Personal Car) | SAP Help Portal
Note - Please ignore the country name in the screenshots, as they are taken from standard documentation and re-used for your easy understanding purposes. You can give any appropriate name to car configuration.
2. We need an appropriate flag or indicator on expense reports that exceeds annual 30K threshold so that they can be identified and treated accordingly for tax purposes.
Technically, it is not feasible to directly flag a report when the annual 30,000 KM threshold is exceeded. However, this requirement can be achieved indirectly by configuring a check against the cumulative annual amount across multiple expense types. Please refer below support article.
Note: Once this configuration is enabled, ensure that users enter the initial distance as 0 KM when registering their car for the first time. This is important for the new configuration to work correctly. For example, if a user has already entered an initial distance exceeding 30,000 KM under the previous configuration, it may impact the new calculations once the updated configuration takes effect. In such cases, you may need to raise a support ticket with SAP Concur to request a reset of the initial distance for the impacted employee.
Example,
Rate/KM = 2 INR
Annual KM threashold = 30000 KM
Total Annual Amount = 60000 INR
Audit rule:
Policy = XXX Expense Policy
AND
Expense type = Mileage / Personal Car / Company Car (choose whichever is appliable)
AND
Entry: Amount-Monthly Total (multiple expense types) greater than 60000 INR
Trigger: Configure either a Warning Message (if report submission should be allowed) or a Hard Stop Message (if submission should be restricted when the claimed amount exceeds the limit).
Note - To avoid unnecessary user queries, I recommend configuring a clear and informative exception message stating that an annual threshold of 30,000 KM applies and any distance exceeding this limit will not be eligible for reimbursement. This will help users understand the system behaviour and set the right expectations upfront.
Article Number | 000083415 |
Title | How to set up an audit rule to prevent the submission of a Mileage expense type based on the accumulated distance? |
Details | I wish to set a hard stop for mileage entries that already surpassed 2000km in the distance to date field. How to set up an audit rule to prevent the submission? |
Resolution/Answer | It’s not possible to set up an audit rule that calculates and prevents submission based on the user's accumulated distance. |
Regarding identification of taxable portion, with reference to below standard document, the mileage taxability is currently supported only for countries with fixed rate vehicle criteria. This currently excludes countries with distance limits, additional rates (passenger rates, other car rates, etc) and regional rates.
As per the setup guide shared above, distance-based KM restrictions can only be configured using either the "Personal Car – Variable Rates" or "Company Car – Variable Rates" car type. Therefore, technically, we cannot leverage the Employee Taxability and Corporate Deductibility Service feature for this particular requirement.
Please refer below standard Employee Taxability and Corporate Deductibility Service setup guide for your further reference.
Note: I have recently worked on a similar mileage requirement for another client using the same approach explained above, so I can confirm this limitation based on my practical experience. However, regarding the taxability requirement, my understanding is based on the two supporting documents shared above.
If this answers your query, then please mark solution as accepted!
This content from the SAP Concur Community was machine translated for your convenience. SAP does not provide any guarantee regarding the correctness or completeness of this machine translated text. View original text custom.banner_survey_translated_text
Thanks for your response.
Please help on below queries.
Query 1
As per the statutory requirement, mileage claims exceeding 30,000 km in a calendar year may still be reimbursed to the employee; however, the amount relating to mileage beyond the 30,000 km threshold needs to be treated as taxable.
We therefore need a mechanism/report to identify employees and corresponding expense reports where the cumulative mileage claimed during the calendar year exceeds 30,000 km. The identified reports/details can then be shared with the concerned Tax/Payroll team for appropriate taxable treatment.
Query 2
As suggested, we considered creating an audit rule based on the claimed amount. However, this approach may not work because the reimbursement rate varies depending on the vehicle type and whether a passenger allowance is claimed.
Car Mileage rate - 0.5 EUR0 Per KM
Motorcycles and motorcycles rate - 0.25 EURO Per KM
Passengers - 0.15 EURO Per KM
For example:
| Employee 1: Car only | 25,000 km | 25,000 × €0.50 | €12,500 |
| Employee 2: Car + Passenger | 25,000 km | 25,000 × (€0.50 + €0.15) | €16,250 |
Although both employees have travelled the same distance of 25,000 km, their total claimed amounts are different, so it will be difficult to identify amount based audit rule.
Thanks,
Shyam
This content from the SAP Concur Community was machine translated for your convenience. SAP does not provide any guarantee regarding the correctness or completeness of this machine translated text. View original text custom.banner_survey_translated_text
Hi @shyam741 ,
Based on my research and with reference to Mileage Service document, mileage taxability is supported only through the Mileage Service feature and is not available under the Legacy Car Configuration.
Therefore, if your client is using Legacy Car Configuration, you may need to use the Legacy Taxability Import to determine the taxable and non-taxable portions.
However, if the client is already using Mileage Service, you can configure Mileage Taxability to calculate the taxable and non-taxable portions automatically.
Attaching screenshot and standard document for your further reference purposes: (Refer Page No - 30)
Hope this helps and resolve all your queries! 🙂
If this answers your query, then please mark solution as accepted!